Nova NM Coaxial Series Monitors

All NM series models are vented 2-way speaker systems. They are equipped with B&C loudspeakers in coaxial configuration, which places a compression driver in the centre of the low/mid speaker. This design emits a single point source with identical horizontal and vertical dispersion without side loop effects, giving an even off-axis sound.

Together with specially designed passive crossovers, Nova NM loudspeakers provide an extremely flat frequency and phase response and deliver a very clean and natural sound quality.

This is an important advantage, especially for monitor applications. Two wedge shapes also allow the use as a high-efficiency floor monitor in short or long throw stage monitor applications. Four M 10 screws for “U” brackets or truss-mounting clamps are installed.

This makes the Nova NM loudspeakers also usable for installation. NM 1 and NM 2 offer an additional tripod base. All NM series models are equipped with neodymium B&C speakers and are made in Germany with a two year warranty.

Nova NM 1
2-Way Coaxial Passive | 1 x 15” Neodym", 1 x 2" Neodym |600W RMS |8 Ohm
99dB |45 - 18,000Hz |Full-range Speaker / Wedge | Speakon in/out
15mm Birch Housing |4 x M10 screws |Tripod base
Dimensions: 630x500x410mm |Weight 33.5 Kg
€1200

Nova NM 2
2-Way Coaxial Passive | 1 x 12” Neodym", 1 x 2" Neodym |400W RMS |8 Ohm
98dB |55 - 18,000Hz |Full-range Speaker / Wedge | Speakon in/out
15mm Birch Housing |4 x M10 screws |Tripod base
Dimensions: 500x400x335mm |Weight 17 Kg
€1100

Recommended amplifiers for the Nova NM Series: Nova X 2000, Nova DXP 2300, Nova DXP 3600